Within the
Results report window click with the mouse onto the
arrow symbol adjacent to magnifying glass and select the
zoom factor of the report view |
By default the application attempts to show the full report
page within the window. You can adjust the magnification factor of that view. |
Press the
printer symbol and confirm various printing parameters to send the
report to the printer for hard copy output. |
Printing of a report can be requested via the
menu
File→Print also.
Reports can be saved as Adobe PDF, MS-Word or MS-Excel documents for
further processing. |
Select the menu
View→Windows→Coupling Coeff. Report. |
The
matrix of thermal coupling coefficients and precision output is shown. |
|
|
Select the menu
View→Windows→Results 3D. |
The
Results 3D
window display the three dimensional graphical evaluation of temperature
distribution and of further
secondary functions (heat flux, relative surface humidity etc.)
Visualizations shown can be distinguished as follows:
- Surface temperature (Surface)
- Surface of equal temperatures (Isosurface)
- Distribution of temperature on a slice plane (SliceX, SliceY,
SliceZ)
- and so on.
The view can be arbitrarily moved with the mouse within the window
allowing detail interrogation onto and into the calculated temperature
distribution. |
Within the
Results 3D
window rotate the view just a bit towards you (the viewer). |
Likewise in
Elemente 3D
Fenster use the mouse to move the view by a „Track-Ball“
held under the mouse. |
At the right side of the
Results 3D window select
Surface.
Turn the
switch Solid off.
You will see the wire frame view onto the discretisation grid used during
the simulation.
Reduce the
Opacity
to 0.1 by using the arrows of the Opacity input field. |
With the tabs
Surface,
Isosurface,
SliceX
etc. you select the tab containing parameters of respective evaluation part.
-
Solid switches between solid model view and wireframe view.
- Opaque
switches the transparency on and off.
- Opacity
defines the level of transparency between 0 (transparent) and 1
(opaque)
- Active
turns the visibility of the selected evaluation part on and off
|
Select the
Isosurface
and change the value of the temperature the isosurface shall express –
move the slider with the mouse. |
The
isosurface
connects points of equal values of temperature.
By moving the slider you are changing the isosurface.
The colour of the isosurface corresponds to the temperature
shown on the
colour scale. |
Within the window
Results 3D
click onto the button „Copy
Image“ |
The 3D view will be created on the clipboard of the
operating system. The image can be then pasted from the clipboard
into any suitable application (e.g. Word) for example for integration into
personalized report.
The image placed on the clipboard is always drawn over white background
for proper hardcopy output. |
Within the window Results 3D select the tab
General
and change the
primary function chosen. |
If there were
secondary functions calculated (this is decided by the
switch „Secondary functions" of "General" panel) a set of them can be
chosen as the primary function for 3-dimensional visualization:
- temperature °C
- heat flux W/m² (the modulus and the vector field)
- relative surface humidity % (only at component's surface)
- etc.
|
Close the window Results 3D by clicking onto the X-symbol
at the top-right corner of theis window. |
|
Close the Coupling Coefficients Report and
Results Report by clicking onto the X-symbol at their top-right
corner. |
|
Select
File→Exit
from the main menu. |
If some project's data has been changed you shall save the
project via the
menu
File→Save prior to exiting the application. |